With Grimace’s forged 3.4-litre S58 assembled, the cylinder head complete and the drivetrain extensively upgraded, we’ve reached one of the most anticipated stages of our BMW G81 M3 Touring build: the single turbo transformation.
Throughout the previous three chapters, we’ve documented the development of an engine and drivetrain package designed around an ambitious 1,500-horsepower target. From increasing the factory S58’s displacement to 3.4 litres, to preparing the cylinder head and strengthening the ZF eight-speed transmission, each stage has been completed with the requirements of the finished combination in mind.
The factory S58 twin-turbo system is remarkably capable, but the airflow demands of a purpose-built 3.4-litre stroker at this level are very different. For Grimace, reaching the next stage meant removing BMW’s original twin-turbo arrangement and developing a completely new single-turbo system.
At the centre of this transformation is a Garrett G45, supported by a Pulsar exhaust manifold, RK Autowerks billet intake manifold and extensive custom fabrication undertaken alongside our friends at Performance Exhaust Centre.
From Twin Turbo to Garrett G45
The Garrett G45 represents a substantial step beyond the airflow requirements of a conventional modified S58, but selecting a large turbocharger simply because we’re chasing a large horsepower figure was never the objective. The turbo system needs to complement the increased engine displacement, extensively prepared cylinder head and upgraded valvetrain, while providing the airflow capacity required as we move Grimace towards its intended power level.
That relationship between each stage of the build is important. In Chapter 1, we transformed the factory 3.0-litre S58 into a forged 3.4-litre stroker engine using the 5150 AutoSport Stroker Kit. Chapter 2 concentrated on allowing that larger engine to breathe through a CNC-ported cylinder head, GSC billet camshafts and an upgraded valvetrain. The Garrett G45 now becomes the next part of that equation, supplying the additional airflow required to take advantage of the work already completed.
We’re deliberately keeping some of the finer specifications of the finished turbo combination within the workshop. At this level, the relationship between turbocharger sizing, engine configuration and calibration is an important part of the development process, and a component list only tells part of that story.
There is, however, one G45 specification we’re more than happy to share. The compressor housing has been finished in custom Techno Violet, matching the colour that has defined Grimace from the beginning. Because apparently fitting a Garrett G45 to a purple, 1,500HP-target BMW M3 Touring wasn’t quite conspicuous enough already.
Building the Hot Side - Pulsar S58 Exhaust Manifold
Supporting the Garrett G45 is a Pulsar Turbo Systems S58 single-turbo exhaust manifold, constructed from high-temperature 310 stainless steel and designed around a T4 twin-scroll turbocharger mounting arrangement. The manifold features 1.5-inch runners and twin PSR 45mm external wastegate flanges, providing the foundation for Grimace’s completely redesigned exhaust-side configuration.
The manifold uses 3D-printed construction and has been designed to accommodate right-hand-drive applications, with particular attention given to downpipe clearance. This is especially relevant when installing a large-frame turbocharger within the confines of the G81 engine bay, where the positioning of the turbocharger, exhaust routing and surrounding components all influence the available space.
Controlling the Garrett’s exhaust energy are twin GFB (Go Fast Bits) EX44 external wastegates, with two individual 1¾-inch screamer pipes fabricated from 304 stainless steel. Rather than returning wastegate discharge into the main exhaust, the dedicated screamer pipes provide separate discharge paths for gases diverted away from the turbine.
The combination of the manifold, external wastegates and custom screamer pipes establishes the hot-side configuration required for the new turbo system, while leaving sufficient flexibility for the boost-control strategy to be developed during the calibration stages.
Custom Exhaust Fabrication - Performance Exhaust Centre
With the Garrett G45 and Pulsar manifold establishing the foundations of the hot side, attention turned to the custom exhaust fabrication required to integrate the new turbo system.
For this stage, we worked alongside Haks and Arthur from Performance Exhaust Centre in Northmead, two highly respected names in Australia’s performance exhaust industry. With Haks bringing over 25 years of experience and Arthur a further 15 years, the pair have more than four decades of combined expertise in custom exhaust fabrication and high-performance applications. Their reputation for exceptional craftsmanship and technical knowledge has made Performance Exhaust Centre one of Australia’s most respected specialist exhaust workshops.
Their work on Grimace centres around a substantial 4½-inch downpipe, fabricated from 2mm-wall 304 stainless steel.
Connecting a downpipe of this diameter directly to the Garrett required a custom solution, with a purpose-machined V-band connection commissioned specifically to mate the 4½-inch pipe to the turbocharger outlet.
The Custom Downpipe
However, the most interesting aspect of the new downpipe is how the exhaust flow has been managed. Rather than directing the entire exhaust stream towards the rear of the vehicle, the 4½-inch section has been fabricated to prioritise flow towards a dedicated 4-inch AES Racing Mufflers exhaust dump valve.
The AES valve provides a more direct discharge path for exhaust gases leaving the turbocharger, reducing the restriction associated with directing the full exhaust stream through the conventional rear exhaust system during high-power operation. A separate 3½-inch bend has been grafted onto the rear of the main downpipe, creating a secondary exhaust path that continues towards the vehicle’s existing midpipe and rear muffler.
The valve incorporates a pump and solenoid arrangement, allowing its operation to be controlled as part of the vehicle’s supporting systems. We’ll explore the control configuration and associated plumbing in Chapter 5, alongside the other supporting systems required to bring the complete package together.
The result is a purpose-built exhaust configuration designed to accommodate the airflow requirements of Grimace’s new single-turbo system while retaining the flexibility of a conventional rear exhaust.
Retaining the WERKE Midpipe & CS Titanium Exhaust
Despite the extensive changes to Grimace’s turbocharging and downpipe arrangement, we wanted to retain the existing rear exhaust hardware wherever practical.
Grimace already features a WERKE 3½-inch midpipe, which Performance Exhaust Centre adapted to connect with the new fabricated front pipe. From there, the system continues into the BMW M Performance CS titanium rear muffler, which has been retained completely unmodified.
This configuration works alongside the AES dump valve arrangement, allowing the majority of exhaust flow to discharge through the dedicated valve during high-power operation rather than relying entirely on the rear exhaust system. When the valve is closed, exhaust gases continue through the WERKE midpipe and CS titanium muffler.
By retaining the existing rear exhaust hardware and concentrating the fabrication work further forward, Haks and Arthur were able to integrate the new turbo system without unnecessarily altering components already fitted to the vehicle.
Custom Charge Piping & RK Autowerks Intake Manifold
With the exhaust side of the conversion complete, attention turned to the compressed-air system connecting the Garrett G45 to the engine.
Performance Exhaust Centre fabricated a custom 3-inch aluminium charge pipe, connecting the turbocharger to the existing RK Autowerks charge piping. The new pipe uses a V-band connection at the Garrett outlet, while clearance limitations within the engine bay required a silicone joiner to connect the fabricated aluminium section to the existing RK Autowerks pipe.
Although relatively straightforward in principle, the available space and positioning of the new turbocharger required the pipework to be fabricated specifically around the installation. The result is a revised charge-air connection that integrates the Garrett with the existing intake hardware.
Completing this side of the build is the RK Autowerks S58 Race Manifold, CNC-machined from 6061 billet aluminium and developed for high-boost S58 applications. Its substantial billet construction provides a robust foundation for the increased operating demands of Grimace’s new engine configuration, while retaining access to the factory oil filter and compatibility with the OEM manifold gasket and mounting hardware.
Together with the custom charge piping, the RK Autowerks manifold establishes the final section of the revised airflow path, connecting the new turbocharging system with the extensively prepared 3.4-litre S58.
Bringing the Single Turbo System Together
With the Garrett G45, Pulsar exhaust manifold, RK Autowerks intake manifold and custom fabrication now brought together, Grimace’s transformation from twin turbo to big single has reached another significant milestone.
The work carried out by Haks and Arthur at Performance Exhaust Centre has been instrumental in integrating the new turbocharger with the vehicle’s existing hardware. From the custom-machined V-band and substantial stainless steel downpipe to the AES exhaust dump valve, screamer pipes and aluminium charge piping, each component has been fabricated around the requirements of the new system and the available space within the G81 engine bay.
It’s also a reminder that developing a high-horsepower engine involves considerably more than selecting the right turbocharger. The exhaust manifold, wastegates, downpipe, charge piping and intake manifold all influence how effectively the complete combination can operate, particularly as the demands on the engine increase.
With the major turbo and exhaust fabrication completed, attention now turns towards the supporting systems required to bring Grimace back to life. In Chapter 5, Everything Behind the Power, we’ll explore the upgraded fuel system, suspension and supporting drivetrain components, alongside the extensive custom plumbing required to bring the complete package together.
There’s still considerable work ahead before Grimace makes its first pull on our Mainline ProHub AWD Hub Dyno, but the new turbo system represents another important step towards our 1,500-horsepower target.
And with a rather large Techno Violet Garrett G45 now sitting where BMW’s original twin-turbo system once lived, the direction of the build is becoming increasingly difficult to hide.
Build Progress
✅ Chapter 1 - Bottom End: From 3.0L to 3.4L
✅ Chapter 2 - Marrying the Head
✅ Chapter 3 - Transmission & Transfer Case Build
✅ Chapter 4 – The Single Turbo Transformation (Current)
⬜ Chapter 5 – Everything Behind the Power: First Start & Run-In
Missed the Previous Chapters?
Grimace’s transformation began long before the Garrett G45 arrived. Catch up on the engine and drivetrain development that laid the foundations for our 1,500-horsepower target.
Chapter 1 - From 3.0L to 3.4L
Discover how we transformed Grimace’s factory S58 into a fully forged 3.4-litre stroker engine using the 5150 AutoSport Bully Stroker Kit, establishing the foundation for the next stage of development.
Chapter 2 - Marrying the Head
Follow the preparation and assembly of Grimace’s CNC-ported cylinder head, GSC billet camshafts and upgraded valvetrain as we bring the forged S58 long motor together.
Chapter 3 - Transmission & Transfer Case Build
With the engine prepared for substantially greater power, attention turned to strengthening the ZF eight-speed transmission and transfer case to support the demands of the finished combination.
Watch Chapter 4 – Single Turbo Time
Follow Grimace’s transformation from factory twin turbo to Garrett G45 big single as we take a closer look at the components, custom fabrication and craftsmanship behind this ambitious conversion. From the Techno Violet turbocharger to the extensive exhaust and charge-piping work by Haks and Arthur at Performance Exhaust Centre, Chapter 4 brings another major piece of our 1,500HP S58 build together.
Frequently Asked Questions
Why convert the BMW S58 from twin turbo to single turbo?
BMW’s factory S58 twin-turbo system offers considerable performance potential, particularly with upgraded turbochargers and supporting modifications. However, a large-frame single-turbo configuration provides an alternative approach to achieving the airflow requirements of an extensively modified, high-horsepower engine. For Grimace, the Garrett G45 was selected to complement our forged 3.4-litre stroker, CNC-ported cylinder head and upgraded valvetrain as we work towards our 1,500-horsepower target.
What turbocharger is being used on Grimace?
Grimace features a Garrett G45 single turbocharger with a custom Techno Violet compressor housing. The turbocharger forms part of a purpose-built system incorporating a Pulsar Turbo Systems S58 exhaust manifold, twin GFB EX44 external wastegates, custom exhaust fabrication and RK Autowerks intake components. The finer specifications of our Garrett configuration are being kept in-house as part of the development programme.
What exhaust manifold is used for Grimace’s S58 single-turbo conversion?
We’re using a Pulsar Turbo Systems S58 exhaust manifold featuring 3D-printed 310 stainless steel construction, 1.5-inch runners, a T4 twin-scroll turbocharger mounting arrangement and twin external wastegate provisions. The manifold has been designed to accommodate right-hand-drive applications, with consideration given to the available downpipe clearance.
What external wastegates are fitted to Grimace?
Grimace uses twin GFB (Go Fast Bits) EX44 44mm external wastegates. These regulate the exhaust energy delivered to the Garrett G45 turbine, helping control boost pressure. Performance Exhaust Centre fabricated two individual 1¾-inch 304 stainless steel screamer pipes to provide dedicated discharge paths for exhaust gases diverted through the wastegates.
Why does Grimace use a 4½-inch downpipe?
The custom 4½-inch downpipe was developed to accommodate the exhaust flow requirements of Grimace’s Garrett G45 single-turbo system. Fabricated by Performance Exhaust Centre from 2mm-wall 304 stainless steel, it incorporates a custom-machined V-band connection and prioritises exhaust flow towards a dedicated 4-inch AES exhaust dump valve. A separate 3½-inch branch connects the system to the existing rear exhaust.
What is the purpose of the AES exhaust dump valve?
The 4-inch AES Racing Mufflers exhaust dump valve provides an alternative discharge path for exhaust gases leaving the turbocharger. When opened, it allows exhaust gases to bypass the conventional rear exhaust system, reducing restriction during high-power operation. The valve incorporates a pump and solenoid arrangement, with its control-system integration covered in the next chapter.
What is the difference between an external wastegate and an exhaust dump valve?
External wastegates regulate boost pressure by diverting exhaust gases away from the turbocharger’s turbine. An exhaust dump valve operates downstream of the turbine, providing an alternative route for exhaust gases leaving the turbocharger. On Grimace, the twin GFB EX44 wastegates manage turbine drive pressure, while the AES valve manages the exhaust discharge path.
Does Grimace still use the WERKE midpipe and CS titanium exhaust?
Yes. Grimace retains its WERKE 3½-inch midpipe and BMW M Performance CS titanium rear muffler. Performance Exhaust Centre adapted the fabricated front pipe to connect with the existing exhaust hardware, leaving the CS titanium muffler completely unmodified.








































































